Sta-Sol® TPM

Data Sheets:

Technical Data Sheet (TDS)

Safety Data Sheet (SDS)

Storage and Disposal

TPM should be stored in tightly closed containers within a cool, dry, well-ventilated area. For safe handling, ensure adequate ventilation and wear personal protective equipment, such as safety glasses and chemical-resistant butyl rubber gloves, to prevent contact with skin, eyes, or clothing.

Avoid breathing vapors and do not distill the product to dryness, as it may oxidize at elevated temperatures.

Do not dispose of TPM in sewers or on the ground. Always dispose of in accordance with federal and local regulations.

Material Compatibility Guidelines:

Stainless steel is recommended for valves, pumps and filters. Teflon is suitable for gaskets. Buna N, butylene polymers and Neoprene are known to swell in contact with Sta-Sol TPM. Information from material suppliers and specific conditions of contact should be considered in the selection of suitable materials.

DISCLAIMER

Although the information and recommendations set forth herein (hereinafter “Information”) are presented in good faith and believed to be correct as of the date hereof, J R Hess Company, Inc., dba 3DSolvents.Com, makes no representations or warranties as to the completeness or accuracy thereof.

Information is supplied upon the condition that the persons receiving the same will make their own determination as to its suitability for their purposes prior to use.  In no event will J R Hess Company, Inc., dba 3DSolvents.Com, be responsible for damages of any nature whatsoever resulting from the use or reliance upon Information.